House and Garden

Hello together

By Siemens there are e.g. the cook fields with the Touchslider only as & quot; Facette& quot; (i.e. in relation to work surface glass plate superelevated) or as & quot; flächenbündige& quot; Version, whereby the Induktionsfeld with the sill plate is cemented. The joint is then so a gummige, nearly sticky mass.

Who has experience thereby? That sees sends out, is this poetry not laboriously to be cleaned if times which overflows? Or if otherwise powder or the like comes into this joint?

Hello with one another

Land search runs, genuinly stretching time selling with search, committing etc.
But therefore ‘ s goes here only at the edge. Well at least the property size could depend on it. We look for rather flat country, we rather spend more funds for the building/interior fittings and/or much window area than on the slope protection.

We plan a house with a floor space of 220-270m2 (sufficient reservoir leaves too) + 2er-ev. 3er Carport + workshop/studio approx. 60-80m2 hand (very property accessible, normal lighting conditions)

Cellars do not need we, in the current are eh only things in it, which we dispose of for a long time, or on eba or ric to sell wanted.

A well isolated base plate became us thus is enough.

Tendentious we tend more to the Bungalow (live at present in a Attika with large terrace and miss the stair rise at all not: D,)

Now we ask which more would actually cost ourselves:
1 sea-honour large base plate for Bungalow + ne smaller for the workshop
1 large base plate for the 2-Geschossige house + ne smaller for the workshop
or
Cellars and workshop in cellars do not separate a base plate for the 2-Geschossige house accommodate. (And have daylight must be still well accessible)

Wanndaufbau still is open and will probably also asks to raise
Wood, stone with ISO or Monolitisch with ISO stone.

The house rather soberly, essentially, building-house-moderately, roof with flat angle or ev. desk.

Greet
Patrick

Our architect gave us an estimate of the fee. It requires for the work as architect and a construction supervisor overall 75' 000 Fr. inclusive VAT. Does this fee correspond to usual practice?

- Fee-entitled costs (exkl. VAT) 511' 800 Fr. with a building sum BKP2-4 of 655' 600 Fr.
- Degree of difficulty 0.9
- Factor with discount 20% = 0.8
- Achievement portion of 100%
- Basic percentage 19% = 0.19

511' 800 Fr. x 0,19 x 0,9 x 0,8 = 70' 014 Fr. (exkl. VAT)

We got thus 20% of the SIA 102-Honorar

I would like to still notice with the fact that the costs are overall and it accompanies us with the selection of kitchen, bath, ground etc.

Which experiences with architects (not GUs) made you relevant?

Hello together,

we concern ourselves for some time with the topic house buying, first have we only used looked at.
Now there is however the idea to make perhaps nevertheless which new. Weil' s then nevertheless better fits.

Offerer for ready for occupancy houses gives it many, to me it e.g. to Bautec with his two-bowl building of the Wall way (at least with certain models) did. Are natural opposite other massif house offerers (know no different!) just as unlocked, also 2-Schalen does not have to be.
But I assume the devil in the detail, speak that there still much follows at additional costs.

We can spend 700k to maximally 800k. Price of land is appropriate for so-called opened development land in the area, which we would have gladly, with 250 to 400 in middle situations. A small property became is enough - if the house fits drauf (a beautiful draft has 11.8×10.8m, is naturally with other houses/manufacturers which different, however nevertheless similarly largely surface will have, if it is to please us).

A possible draft is to round cost 470k, with cellar, excavation, architect and Igenieurleistung (evenly the Bautec Beschireb, is on-line really detailed not yet). Come does a small property (400 - 500 square meter?) in addition, would be that again 150k. My assumption: That becomes badly scarce, if there still large costs come otherwise to it, and evenly I fear (also then if I before the land purchase to examine leave that there are no large problems with the ground)

Thanks for your hints! I could naturally ask the bank, but I have the impression that those want to absolutely give me the money, nearly as if her are welfare glad, if it takes to one (no, I will not write, which bank is that)

Good day allerseits

We have a white problem.

Those wound with NCS 0500-n painted and now to be supposed we in addition decide, which wood base fits best.
The bases ‘ s in ral to 9010 (sees rather yellowish out if I the base to existing ncs 500 wound delay) or ral 9003 gives. We know the base auc in ncs 0500 order cost then however 10. - /lm more. We do not want to spend this eigentlic.

Best thanks for pieces of advice.

Greetings

hello

last week the installations were made finished, so that blow door the test could be accomplished.
here the contributions and the pictures

greenhous|e minergie|p 20090616_holzrahmenbau_ausbau1
greenhous|e minergie|p 20090616_holzrahmenbau_ausbau2

greenhous|e minergie|p blow door test
greenhous|e minergie|p KW of 26 development

greet massimo

hello together

we are straight in beautiful the planning phase for user new hüsli I are (of look at ago) an absolute fan of the ikea kitchens and would like one to actually absolutely have have someone from you thereby already experiences? positively? negatively?

thanks in advance for your feedback!
musli99

Hello

We are current at building a Minergie p ECO of house. I reported already briefly in other place of the forum (members to place itself forwards) on it. Today now in our house - carcass and still before beginning of the actual interior work - the Blower Door test was made. We reached with the test a q50 of 0,64 (m3/h x m2). Converted to the n50, st, this results in the final account a n50, st from 0,5 (h-1)
Limit value for Minergie p is 0.6 (h-1)
Only with it no misunderstanding arises: The above instructions, thus all the computational & quot; Zeugs& quot; , I do not understand in detail also so exactly. The data of our architect got. Which I understand however clearly am that we existed the Blower Door test thereby. Juhui!
We are with our value approx. 20% under the prescribed limit value. Which is surely still important in this connection: The good value was reached with 5 sliding wing windows. This kind window make more difficult usually a reaching of & quot; guten& quot; Values. We have as it were over the whole south facade (16 m) of 14 meters of sliding wing windows. We are genuinly happy the fact that we created now this hurdle and so that the certification a giant step more near came.
I will place nächstens time a few pictures of our house in the forum - hope it folds! -. Wellingtonia, our super moderator in the forum, already received some data from me.
Lg & quot; teo& quot;

Hello together!!

I hope it can me someone help!!! : confused:

The following:
We are to be arranged about our terrace and/or occupied with natural stone.
Our GU applied a Gefällsüberzug on the raw concrete cover (see pictures) which now downward gradients of approx. 2% has.
After drainage of this coat (approx. 3 weeks) it applied a twice painting of bitumen now. On this painting it moved still another black fleece, which is to protect the painting. (This kind of structure was not so far so well-known me, naja)

Our idea was, which we move on the sealing a Travertin, which loose is to be moved, so that water can escape also under the plates.

Since I come a little of the subject, I inquired about a Drinage, which derives the water better and also the natural stone before stopping flowering, Verunkrautung etc. to protect is.

After the inspection of the specialist my assumption was confirmed. It meant to be welded on the terrace, that was to be treated like a flat roof, one at least 2 lagige bitumen layer must.
Besides this must be pulled up at the front, in order to avoid damage to the front.

After consultation with our GU, this meant (easily made nervous) which we would have a WU-concrete, which does not have to be sealed additionally.

Now my questions: : o
1. White someone as thickly a WU-concrete thick to be must, which is he a WU-concrete?
2. Can one improve a WU-concrete with additive of chemistry?
3. Does someone have an advice, how the structure of terrace has to look?
4. How does it look out with bitumen courses or is enough a painting?

Best thanks for your feedback!

A beautiful evening your Fienchen: 20:

Here still the pictures:

Appendix 6566

Appendix 6567

Attached diagrams

1.jpg (504.3 KB)

2.jpg (260.1 KB)

We are now 2 weeks ago ago into our beautiful little house drew in and except the problem that one of our cats ran away, run also nearly all prima.
Only the brothers of last one mile the latter do not create it simply to offer to us ADSL. We have 2 months in advance ordered and now are them since 2 weeks auxiliary, service and useless to look times.

Unfortunately there is no cable system for the Glotze at the residence (actually not necessarily an edge region) also (we have evenly SAT) and a radio hole is the hill also: 73:.
Does someone know still another alternative for a decent Internet connection? We work momentarily with Internet Everywhere of orange (50 kbit/s), which is extremely nervig.
The absolute scorn is to the fact still that the Swisscom an optical waveguide cable put us in the house. Only unfortunately runs somewhere in the Nirvana and probably not in the next 10 years one attaches: eek:.
And in the end still this: The next junction box is approximately 5 km far away! Is that normal?

Greetings from the office
Muffinman